Easy TS Pharma

The EasyTS leak detection bench is the best solution for the reliable detection of microcracks or pinholes. Affecting the sterility of containers.

Functioning

Easy TS allows the operators to perform leak tests of all kinds of containers filled with liquid products (glass ampoules and vials, plastic bottles, infusion bags, BFS strips, and bottles). It can be used for offline tests of samples or, with few units, it is possible to inspect 100% of small-medium production. The operator puts the container inside the bench and presses the pushbutton: the bench automatically executes the test (in 0,1 sec) and turns on a green/red lamp to indicate the OK/NOK result.
Once set up, it doesn’t require any calibration or specific skills to be used. Parameters are saved in recipes; numerical and graphic results are also visualized on the display.

Detection method

The bench applies the well-known high voltage method: if any leak is present, a discharge current will flow through the pinhole into the container and be measured by the system.

Main Strengths

• Compact design
• Modular system for different containers with fast size change (one minute only)
• Immediate OK/NOK output
• Sensibility compatible with microorganism dimensions (some micron)
• Minimal energy transferred to the product (less than 0,08J)
• No specific skills needed
• Siemens PLC and display
• Fully safe condition for the operator
• Stainless steel and FDA-approved plastic material
• Applicable also to liquids with low conductivity, such as distilled water

Features

• Dimensions (LxWxH) 400 x 360 x 650 mm
• Weight 15 Kg
• Electrical / Power 230V   50/60 Hz   1 Ph   250W
• Test voltage Up to 40 KVolt
• Containers material Glass, PE, PET, PPE
• Containers types Vials, ampoules, BFS strips, infusion plastic bags, BFS bottles
• Containers dimensions 1 to 2500 ml
• Sensibility about 1 micron
• Product conductivity ≥ 2,5 µSiemens/cm